Dongfeng 16m high altitude operation hydraulic platform truck

A truck mounted aerial work platform is a type of hydraulic lifting vehicle used for operations, widely used in the fields of electricity, streetlights, municipal engineering, landscaping, communication, airports, shipbuilding, transportation, advertising, photography, and other high-altitude work areas.

Chengli Special Purpose Vehicle Co., Ltd. is a car company specializing in the production of truck mounted aerial work platform. There are mainly two types of truck mounted aerial work platform produced. One is the telescopic arm truck mounted aerial work platform, which rotates 360 degrees and has the function of full height walking telescopic arm extension and lifting. The front legs can be selected as front V and rear H types, which can be adjusted separately. The leg span is large, and the overall stability of the vehicle is better. The support legs are equipped with position detection switches and automatic sensing functions. The base can rotate 360 degrees in both directions. The working bucket adopts electric rotation, which can rotate infinitely 360 degrees. The hanging basket is made of high-strength aluminum alloy, which is flexible and lighter in weight, making work more convenient without the need to repeatedly start the vehicle to adjust direction and position. Hexagonal working arm, synchronous telescopic, compact structure, large operating range, built-in telescopic oil cylinder, hydraulic oil pipe outward rotation, chain telescopic mechanism, easier to observe fault points, convenient for maintenance, better structural strength, making telescopic smoother. The working range and working radius can be automatically limited. You can also choose to install a large screen display, which can show arm length, working height, working range, and tilt angle. Remote control can be used to turn off and start the high-altitude work vehicle. The emergency pump works, and if the engine fails, the overall boom can be retracted. There is also protection for getting on and off the operating arm. The whole vehicle adopts a fully electronic control system with multiple safety protection functions. The lifting height can reach 10-45 meters

One type is a folding arm truck mounted aerial work platform, which is equipped with control devices inside the work bucket and on the rotating seat. It remotely controls the start/stop, high/low speed of the engine, and uses an electro-hydraulic proportional valve to control the action of the arm. It has good stability, and the work arm can rotate continuously 360 ° left and right. It automatically maintains the level of the work slot through the linkage mechanism. When the main pump fails, it can operate the emergency pump to lower the work slot. It has night lighting and can lift heavy objects up to a height of 10-24 meters. The chassis hydraulic leg balance system comes standard with a bidirectional hydraulic lock, the working arm cylinder comes standard with a bidirectional balance valve, and the working arm balance mechanism is an external balance rod. Steel toolbox and patterned anti slip walking board, stainless steel fence. The hydraulic cylinder, hydraulic oil pipe, hydraulic lock, balance valve, gear oil pump, power take-off, multi way valve and other main components of the Chengli high-altitude work vehicle are made of well-known domestic brands. The vehicle's hydraulic system has smooth reversing, flexible and convenient operation, and the support legs are interlocked with the working arm for safety and reliability, preventing misoperation. The H-shaped support legs have a large span and good stability. The support legs can be independently extended and retracted, as well as linked. The rear support legs are equipped with support leg flashing lights, which are used to indicate the support leg profile during operation and emit light alarm signals. The manned work bucket comes standard with a carbon steel work bucket and can be optionally equipped with a fiberglass insulated bucket, with a load-bearing capacity of no more than 200 kilograms. The work bucket adopts a mechanical self balancing design, with two sets of upper and lower operating systems, which can be operated on both the work bucket and the turntable. The work bucket is equipped with night work lights, making night work safer, and the legs are individually adjustable. Each leg can be adjusted separately according to the working ground environment, even if the ground is uneven, it can make the whole vehicle adjust to a balanced state. The legs adopt a front and rear H-shaped structure, with a larger force surface and higher stability. At the same time, we can customize high-altitude sprinkler trucks or high-pressure cleaning high-altitude vehicles according to customer requirements.

The chassis of truck mounted aerial work platform generally adopts Dongfeng, Sinotruk howo, FAW, Shacman, Isuzu, JMC, JAC, etc. The 4X2 chassis can be used below 45 meters, or a 6X4 chassis can be optionally installed according to customer requirements for greater stability. The production time of truck mounted aerial work platform is relatively short. Generally, after got deposit of 15 working days is required to produce the body of the truck mounted aerial work platform. In addition to the whole vehicle, our company can also draw a high-altitude installation that matches the local chassis parameters based on the drawings provided by the customer. The entire vehicle will be shipped in a container to the destination for installation. Before leaving the factory, there will be strict test videos to inspect the quality of the vehicle, and operation videos will be provided for customers to learn and use later. The installation of the truck mounted aerial work platform will also be tested and installation drawings will be provided before leaving the factory.

Chengli Automobile Co., Ltd. provides you with various types of truck mounted aerial work platform, including 8 meters, 10 meters, 12 meters, 14 meters, 16 meters, 18 meters, 22 meters, 24 meters, 30 meters, 33 meters, 36 meters, 45 meters, etc. The products are solid and reliable, with a high market share and reasonable prices. The products are exported both domestically and internationally, and customers can spray paint to customize logos and design and produce vehicles that meet their requirements.

As a manned truck mounted aerial work platform, safety is particularly important. The truck mounted aerial work platform produced by Chengli has the following advantages

The product quality is excellent, with over 20 years of production and sales experience continuously improving and updating production processes, ensuring safety and reliability

The two vehicles are equipped with safety systems, safety valves, emergency pumps, hydraulic locks, and other well-known domestic and foreign brands, which have good stability and high work efficiency

 Reasonable prices, provide timely after-sales service and maintenance suggestions, provide video guidance for customers on installation and use, and include a user manual with the car.

 Aerial work vehicle is a vehicle that sends staff to a height of 10 meters to 45 meters for operations such as high-altitude advertising shooting, high-altitude power repair, high-altitude washing, etc. , it adopts automobile chassis and is equipped with hydraulic outriggers, with safety guardrail, which can be operated up and down

1. Automatic Bucket Balance System, Bucket will be Stayed in Balance Level in All Working Time.
2. The Stretching Angle Up to 80°, which will be Easier to Handle in All Time.
3. Full Computer Control System with Danger Waring System.
4. LCD Screen in Both the Bucket and Truck to Display the Working Status.
5. Rectangular Shape Arms to Increase the Arm Strength.
6. V Shape Leg, H Shape Leg can Adapted to Different Road Condition Increasing the Stability